| Connector |
Type |
Description |
| Setpoint |
input, string |
Sets the desired temperature |
| Mode: Off |
input, trigger |
This predefined mode turns of the ventilation |
| Mode: Timer |
input, trigger |
This mode uses a predefined timer setting |
| Mode: Normal |
input, trigger |
This mode is for normal usage |
| Mode: Fireplace |
input, trigger |
This mode creates a over pressure making it easier to start a fire |
| Supply Fan, Trickle speed |
input, string |
Sets the supply fan speed (%) for Trickle mode. Note: This value is stored in the HVAC device for this mode! |
| Supply Fan, Normal speed |
input, string |
Sets the supply fan speed (%) for Normal mode. Note: This value is stored in the HVAC device for this mode! |
| Supply Fan, Boost speed |
input, string |
Sets the supply fan speed (%) for Boost mode. Note: This value is stored in the HVAC device for this mode! |
| Supply Fan, Coocker hood speed |
input, string |
Sets the supply fan speed (%) for Coocker hood mode. Note: This value is stored in the HVAC device for this mode! |
| Extract Fan, Trickle speed |
input, string |
Sets the extract fan speed (%) for Trickle mode. Note: This value is stored in the HVAC device for this mode! |
| Extract Fan, Normal speed |
input, string |
Sets the extract fan speed (%) for Normal mode. Note: This value is stored in the HVAC device for this mode! |
| Extract Fan, Boost speed |
input, string |
Sets the extract fan speed (%) for Boost mode. Note: This value is stored in the HVAC device for this mode! |
| Extract Fan, Coocker hood speed |
input, string |
Sets the extract fan speed (%) for Coocker hood mode. Note: This value is stored in the HVAC device for this mode! |
| Outdoor Temperature |
ouput, string |
Outdoor Temperature |
| CO2 |
ouput, string |
CO2 measured in ppm. This output requires a special module in the ventilation system. |
| Supply Temperature |
ouput, string |
Supply air temperature |
| Supply fan speed |
ouput, string |
Fan speed measured in % |
| Extract Temperature (room) |
ouput, string |
This is the measured room temperatures |
| Extract fan speed |
ouput, string |
Fan speed measured in % |
| Post heater defrost |
ouput, string |
|
| Post heating |
ouput, string |
Post heating measured in % |
| Pre heater defrost |
ouput, string |
|
| Pre heating |
ouput, string |
Pre heating measured in % |
| PHE/RHE defrost |
ouput, string |
|
| Humidity Parameter 1 |
ouput, string |
Humidity measured in %rH |
| Humidity Parameter 2 |
ouput, string |
Humidity measured in %rH |
| Cooling |
ouput, string |
Cooling measured in % |
| Heating/Cooling Recovery |
ouput, string |
Recovery measured in % |
| Ventilation Error |
ouput, string |
Errors reported by the ventilation system |
